在线咨询
13817848639
Basic sensor for simple applications - mounting on top-hat rails.
The PS 27 differential pressure transducer is a basic sensor for simple applications with very little hysteresis, temperature dependence or zero-point drift.
In addition to differential pressure data, the PS 27 also records positive and negative overpressures, and is suitable for measuring air and all non-aggressive gases. Zero-point calibration can be performed via an external control signal. A jumper is available for selecting the output signal.
A built-in adapter for top-hat rails allows the PS 27 to be mounted on top-hat rails (e.g., in a control cabinet) with no additional accessories required. With the optional switching output, a visual or audible alarm can be triggered whenever values fall above or below a threshold parameter. The PS 27 is a simple, precise pressure transducer for applicati
 |
Basic sensor, very little hysteresis, contact points, suitable for mounting on top-hat rails, IP65 protection class. |
| Technical data: |
| High level of sensitivity High level of accuracy and long-term stability Measuring ranges: ± 100 to ± 200 kPa Linearity: 1,5 % v.E. Very little zero-point drift: 0,1 % /K Very little hysteresis :0,1 % / K Overload protection:: 4x for measurement ranges <= 30 kPa 12x for measurement ranges <= 20 kPa Output signals: 0 - 10 V, 0/4 - 20 mA Supply voltage: 24 V AC/DC ( no galvanic separation) 15..32 VDC (two wire system) Top-hat rail mounting Medium: air, all non-aggressive gases. Further information available on request |
-
支持定做
可根据客户要求定制不同规格的过滤器、过滤棉 -
外框可选
外框可采用镀锌框，铝框，不锈钢等材质 -
优良滤材
滤材可选用无纺布，静电棉，玻璃纤维等材质 -
产品优势
源头工厂，拥有先进设备，产品经过严密的检测，合格出厂
Basic sensor for simple applications - mounting on top-hat rails.
The PS 27 differential pressure transducer is a basic sensor for simple applications with very little hysteresis, temperature dependence or zero-point drift.
In addition to differential pressure data, the PS 27 also records positive and negative overpressures, and is suitable for measuring air and all non-aggressive gases. Zero-point calibration can be performed via an external control signal. A jumper is available for selecting the output signal.
A built-in adapter for top-hat rails allows the PS 27 to be mounted on top-hat rails (e.g., in a control cabinet) with no additional accessories required. With the optional switching output, a visual or audible alarm can be triggered whenever values fall above or below a threshold parameter. The PS 27 is a simple, precise pressure transducer for applicati
|
Basic sensor, very little hysteresis, contact points, suitable for mounting on top-hat rails, IP65 protection class. |
| Technical data: |
| High level of sensitivity High level of accuracy and long-term stability Measuring ranges: ± 100 to ± 200 kPa Linearity: 1,5 % v.E. Very little zero-point drift: 0,1 % /K Very little hysteresis :0,1 % / K Overload protection:: 4x for measurement ranges <= 30 kPa 12x for measurement ranges <= 20 kPa Output signals: 0 - 10 V, 0/4 - 20 mA Supply voltage: 24 V AC/DC ( no galvanic separation) 15..32 VDC (two wire system) Top-hat rail mounting Medium: air, all non-aggressive gases. Further information available on request |